CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

How to import PARTRAN file to Gambit?!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 31, 2005, 06:11
Default How to import PARTRAN file to Gambit?!
  #1
anisa
Guest
 
Posts: n/a
Hi, everybody! I'm starting user of Gambit and Fluent. One colleague has sent to me PATRAN file with ready mesh. When I import it to fluen I can't determine a boundary conditions. I can determine a boundary conditions at Gambit. How to import Patran file to Gambit? Yours frd.
  Reply With Quote

Old   June 1, 2005, 11:16
Default Re: How to import PATRAN file to Gambit?!
  #2
Mark
Guest
 
Posts: n/a
You can import a PATRAN Neutral file using the following menu

->File

->Import

->Mesh

Then specififying the type as PATRAN and Dimension as either 2D-planar surface mesh, 3D-volume mesh or 3D-Surface mesh. You must also specify a featuring angle.

Good Luck

Mark
  Reply With Quote

Old   June 1, 2005, 12:52
Default Re: How to import PATRAN file to Gambit?!
  #3
anisa
Guest
 
Posts: n/a
Dear Mark, Patran file has pat extension.If I do that you written above, in Gambit needs a neu extension and pat extension is unvisible ...
  Reply With Quote

Old   June 6, 2005, 11:58
Default Re: How to import PATRAN file to Gambit?!
  #4
Mark
Guest
 
Posts: n/a
You will need to generate a PATRAN neutral file before you can import it into fluent/gambit. This acan be done inside PATRAN using the /file/export menu.

Regards

Mark
  Reply With Quote

Old   June 7, 2005, 05:24
Default Re: How to import PATRAN file to Gambit?!
  #5
anisa
Guest
 
Posts: n/a
Thanks Mark very much, I understand everythink
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[swak4Foam] swak4foam building problem GGerber OpenFOAM Community Contributions 54 April 24, 2015 17:02
OpenFOAM 1.7.1 installation problem on OpenSUSE 11.3 flakid OpenFOAM Installation 16 December 28, 2010 09:48
1.7.x Environment Variables on Linux 10.04 rasma OpenFOAM Installation 9 July 30, 2010 05:43
[blockMesh] BlockMesh FOAM warning gaottino OpenFOAM Meshing & Mesh Conversion 7 July 19, 2010 15:11
How to make a dat file to import to Gambit Elham ANSYS Meshing & Geometry 2 November 7, 2009 01:32


All times are GMT -4. The time now is 00:35.