CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

2 phase problem(water + steam)

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 9, 2005, 13:25
Default 2 phase problem(water + steam)
  #1
pavan reddy
Guest
 
Posts: n/a
hi this is pavan i ma doing a problem in which i have a container kind of thing which is heated to a certain temperature into which water is dosed i got only one inlet and about 25-30 outlet holes and all the outlets are in the same family for inlet i have given velocity inlet and for outlet pressure outvents as boundary conditions above operation takes place at atm pressure only i have a very less mass rate of water the problem is i am not able to get convergence for continuity eqn only can someone suggest whether those boundary conditions will work and suggest any other best way of simulating the above model thanks for your time
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
alphaEqn.H in twoPhaseEulerFoam cheng1988sjtu OpenFOAM Bugs 15 May 1, 2016 17:12
two Phase column simulation chemeng OpenFOAM 3 August 18, 2010 13:53
How to simulate steam cavitation event CFX JRL4444 Main CFD Forum 2 February 13, 2009 14:33
compressible two phase flow in CFX4.4 youngan CFX 0 July 2, 2003 00:32
phase change water to steam Tej FLUENT 0 March 25, 2003 00:21


All times are GMT -4. The time now is 15:56.