CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Bubble columm - BC

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 10, 2005, 09:56
Default Bubble columm - BC
  #1
Sic
Guest
 
Posts: n/a
Hi everyone. My problem is a bubble columm (water-air). There is an inlet of air in the bottom e i would like that just this air get out in the top. My question is: Who can i put a boudary condition that just the air massflow out and the water not?

Thanks
  Reply With Quote

Old   June 10, 2005, 10:07
Default Re: Bubble columm - BC
  #2
aPpA
Guest
 
Posts: n/a
One way of doing this is, extend the height of the bubble column over the liquid height and patch it with unit vof of air. This will make the water to stay in the system and not go thru the pressure outlet/outflow boundary condition for the outlet. Better free surface conditions such as "Degassing boundary condition" are available in FLUENT as UDF's
  Reply With Quote

Old   June 10, 2005, 10:13
Default Re: Bubble columm - BC
  #3
Sic
Guest
 
Posts: n/a
And how can i use the UDF? Do you have some example of this kind of boundary condition? Degassing boundary?
  Reply With Quote

Old   June 10, 2005, 10:21
Default Re: Bubble columm - BC
  #4
aPpA
Guest
 
Posts: n/a
I never tried to use the degassing boundary condition UDF by myself, but u can get it from the FLUENT UDF archive examples. The procedure how to use it is explained clearly in the UDF. Goodluck..!

  Reply With Quote

Old   June 10, 2005, 10:23
Default Re: Bubble columm - BC
  #5
Sic
Guest
 
Posts: n/a
thank you very much!!!!
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
bubble rising problem swamysrikanth ANSYS Meshing & Geometry 2 September 22, 2010 08:00
Separation bubble, hypersonic compression corner ben akih CFX 3 December 10, 2006 17:33
gas hold up in bubble Shelly Main CFD Forum 0 November 13, 2006 01:28
Query on VOF for Bubble rise Vamsi Main CFD Forum 0 December 22, 2005 01:02


All times are GMT -4. The time now is 02:35.