|
[Sponsors] |
June 12, 2005, 05:14 |
surface shape chanes by deposit
|
#1 |
Guest
Posts: n/a
|
My problem is: particles-laden gas passes through an obstacle at high temperature, a large amount of the partially molten particles may stick on the obstacle surface which makes the shape of the obstacle change with time. Therefore, the influence of the shape on the gas¨Cparticle motion should be taken into account. How to model the dynamic process using Fluent? Thanks.
Zhou |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] Problems with coedge curves and surfaces | tommymoose | ANSYS Meshing & Geometry | 6 | December 1, 2020 11:12 |
[Gmsh] Error : Self intersecting surface mesh, computing intersections & Error : Impossible | velan | OpenFOAM Meshing & Mesh Conversion | 3 | October 22, 2015 11:05 |
[Gmsh] Problem with Gmsh | nishant_hull | OpenFOAM Meshing & Mesh Conversion | 23 | August 5, 2015 02:09 |
[Gmsh] boundaries with gmshToFoam | ouafa | OpenFOAM Meshing & Mesh Conversion | 7 | May 21, 2010 12:43 |
CFX4.3 -build analysis form | Chie Min | CFX | 5 | July 12, 2001 23:19 |