CFD Online URL
[Sponsors]
Home > Forums > FLUENT

problem with reading my prePDF file into fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By James Willie

Reply
 
LinkBack Thread Tools Display Modes
Old   June 14, 2005, 14:43
Default problem with reading my prePDF file into fluent
  #1
James Willie
Guest
 
Posts: n/a
Hi Everyone,

I am trying to model liquid fuel combustion using the prePDF approach in fluent. However, I am not able to load the PDF file that was created in prePDF. I did the following: Define > Model > Species and activated the "Composition PDF Transport" model and had expected that a file selection menu will come up for me to select my PDF file. This was not the case.

I guess there is a way i can link fluent to prePDF.

Counting on your assistance.

James
  Reply With Quote

Old   June 17, 2005, 09:33
Default Re: problem with reading my prePDF file into fluen
  #2
Silvia
Guest
 
Posts: n/a
You should follow define>model>species>non premixed combustion. Bye Silvia
  Reply With Quote

Old   June 20, 2005, 09:51
Default Re: problem with reading my prePDF file into fluen
  #3
James Willie
Guest
 
Posts: n/a
Hi Silvia,

Thanks for replying to my post. I have done what you suggested to no avail. I simply do not know how one can create this link between fluent and prePDF. I have my PDF file already defined in prePDF but I am not able to load it into fluent.

Counting on your help.

James

soufy1990 likes this.
  Reply With Quote

Old   June 21, 2005, 06:24
Default Re: problem with reading my prePDF file into fluen
  #4
Silvia
Guest
 
Posts: n/a
I work with Fluent 6.0 and I load pdf file following : define>models>species>non premixed combustion>ok and then a file selection menu will come up for you to select your PDF file.

I don't understand why these instructions don't work... Silvia

  Reply With Quote

Old   November 22, 2009, 12:55
Default
  #5
New Member
 
Anonymous
Join Date: Aug 2009
Posts: 6
Rep Power: 7
buceco is on a distinguished road
Did u eventually resolved your problem?

Cheers.

RMN
buceco is offline   Reply With Quote

Old   November 25, 2010, 08:31
Default How do I access prePDF?
  #6
New Member
 
Join Date: Nov 2010
Posts: 10
Rep Power: 6
A CFD User is on a distinguished road
Hi, James
I'm new to Fluent, CFD, and all that. I'm trying to follow a tutorial that instructs to "Start prePDF" as its first step. But, I don't even know how to do that. I mean, I didn't find any prePDF software after installing my Fluent 6.1 package. Could you please tell me how I can start prePDF preprocessor to creat a prePDF file!? Is it already installed now? or I have to install it separately?

Thank you in advance



Quote:
Originally Posted by James Willie
;121536
Hi Everyone,

I am trying to model liquid fuel combustion using the prePDF approach in fluent. However, I am not able to load the PDF file that was created in prePDF. I did the following: Define > Model > Species and activated the "Composition PDF Transport" model and had expected that a file selection menu will come up for me to select my PDF file. This was not the case.

I guess there is a way i can link fluent to prePDF.

Counting on your assistance.

James
A CFD User is offline   Reply With Quote

Old   November 25, 2010, 19:23
Default
  #7
New Member
 
Anonymous
Join Date: Aug 2009
Posts: 6
Rep Power: 7
buceco is on a distinguished road
Hi.
You will have have to install PrePDF. and after this it will be easy for u to fallow the tutorials instructions.

Good luck,

Buceco
buceco is offline   Reply With Quote

Old   November 26, 2010, 09:17
Default
  #8
New Member
 
Join Date: Nov 2010
Posts: 10
Rep Power: 6
A CFD User is on a distinguished road
Hi, Buceco
Thank you, but, I don't know where to find prePDF preprocessor. I have both Fluent 6.1 and 6.3.26 source files, but neither has prePDF. Besides, when I try to make PDF files using the built-in PDF table creator of Fluent 6.3 (Define> Models> Species> Transport & Reactions), I can't find many of the options equivalent to those of prePDF preprocessor, which are addressed by the tutorials I'm following.

I'd appreciate it if you let have your guidance on this issue.
Thank you

Quote:
Originally Posted by buceco View Post
Hi.
You will have have to install PrePDF. and after this it will be easy for u to fallow the tutorials instructions.

Good luck,

Buceco
A CFD User is offline   Reply With Quote

Old   December 20, 2011, 15:55
Default
  #9
New Member
 
BENMENZER SOUFYANE
Join Date: Dec 2011
Posts: 3
Rep Power: 5
soufy1990 is on a distinguished road
Quote:
Originally Posted by James Willie
;121663
Hi Silvia,

Thanks for replying to my post. I have done what you suggested to no avail. I simply do not know how one can create this link between fluent and prePDF. I have my PDF file already defined in prePDF but I am not able to load it into fluent.

Counting on your help.

James
HI james

to creat link between Fluent and prepdf it must do this

(Fluent - file- read - pdf )

thnks

but i dont have this prePDF software

could you help me fore Download this prepdf

give me the link plz
soufy1990 is offline   Reply With Quote

Old   March 10, 2012, 03:51
Question thanks in advance
  #10
New Member
 
saiashok
Join Date: Feb 2012
Posts: 1
Rep Power: 0
saiashok is on a distinguished road
i'm doing CFD analysis on pulverized coal combustion in a tangentially fired furance...I'm using FLUENT 6.3.26,for this version how can i give prePDF ....
Where can i download the prePDF software,is there a link???
please help me find it...
saiashok is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem in running ICEM grid in Openfoam Tarak OpenFOAM 6 September 9, 2011 18:51
problem of running parallel Fluent on linux cluster ivanbuz FLUENT 11 March 10, 2010 16:13
Problem in IMPORT of ICEM input file in FLUENT csvirume FLUENT 2 September 9, 2009 02:08
Compiling OpenFOAM13 on AMD64 with Redhat Enterprise mbeaudoin OpenFOAM Installation 20 June 17, 2008 07:43
error while compiling the USER Sub routine CFD user CFX 3 November 25, 2002 16:16


All times are GMT -4. The time now is 16:44.