CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   GAMBIT: Assumption of an edge type while meshing (http://www.cfd-online.com/Forums/fluent/37025-gambit-assumption-edge-type-while-meshing.html)

Agnes June 22, 2005 13:37

GAMBIT: Assumption of an edge type while meshing
 
I'm having difficulty using both the map and submap schemes to mesh a serpentine channel system I've designed in GAMBIT. I've ensured that all faces of the system are connected, and I've enforced a mesh on all the individual edges to be meshed. However, when I go to mesh it, I receive the following error: Command> volume mesh "volume.39" "volume.38" submap size 1 WARN: Assumption of an edge type on edge 761 is being made. WARN: Assumption of an edge type on edge 769 is being made. ERROR: Unexpected error when meshing volume volume.39 using submapping. Anyone have any ideas? Cheers, Agnes


All times are GMT -4. The time now is 02:08.