CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

between IDL Gambit and rhino, any help?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 23, 2005, 13:08
Default between IDL Gambit and rhino, any help?
  #1
philip
Guest
 
Posts: n/a
curently i am using idl to write stl files from polygon and vertices data. however when i import the stl in gambit or fluent it doesnt have the indivual faces, just the virtual geometry(which is nearly impossible to work with) so setting the boundary conditions doesn't work

Would anyone know a way to either: a) from the polygon and vertices data write an IGES, STEP, ACIS, or parasolid file, or other format gambit supports imports of (using idl preferably)

b) after converting the stl file to a dxf file, use rhino to export a geometry to gambit that will succesfully mesh

c) know which format works best between gambit and rhino (i'm not very familiar with rhino) currently i get messages about perturbing nodes when i try to mesh in gambit.

d) a way to fix imported geometry in gambit so that the volumes will mesh (mesh is initializing but not refining)

Overall the goal is to get to fluent and be able to set boundary conditions. Any help or suggestions would be greatly appreciated. I'm getting desperate trying to get this to work.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
gambit fatal error Mavinakere FLUENT 0 July 12, 2002 17:27


All times are GMT -4. The time now is 07:14.