non-positive surface area
Hai guys!
While meshing in gambit, there is no grid problem as I checked in face mesh-check. But in fluent, while grid checking, it failed due to non-positive area, Even after refining the grid. Please help me to eradicate the problem. |
Re: non-positive surface area
i)Are you using axissymmetric.If so the axis has to be parrel to X axis and all grid should be positive X axis. ii)Check the skewness of grid in gambit.If this is more than 0.9 better remesh this.
good luck |
Re: non-positive surface area
Thanks Balaji,
But I am not axisymmetric. As well, my max skew is 0.8493. Vengi |
Re: non-positive surface area
then what is your problem define it corectly
|
All times are GMT -4. The time now is 11:01. |