How to mesh the worm-inlet cyclone -- CFD Online Discussion Forums

July 7, 2005, 03:59	How to mesh the worm-inlet cyclone	#1
Fuping Qian Guest Posts: n/a	In my current project, I have met one question about a cyclone simulation. The cyclone here is a worm-inlet cyclone. I want to generate hex meshes for this cyclone. However, due to the sharp-angled exiting at the inlet area, it is difficult for me to generate any meshes. Hope someone can give me some suggestions or advice. Thanks in advance.

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Gmsh] 2D Mesh Generation Tutorial for GMSH	aeroslacker	OpenFOAM Meshing & Mesh Conversion	12	January 19, 2012 03:52
[snappyHexMesh] external flow with snappyHexMesh	chelvistero	OpenFOAM Meshing & Mesh Conversion	11	January 15, 2010 19:43
Icemcfd 11: Loss of mesh from surface mesh option?	Joe	CFX	2	March 26, 2007 18:10
How to control Minximum mesh space?	hung	FLUENT	7	April 18, 2005 09:38
how to mesh the tip region of cyclone?	Lcw	FLUENT	1	January 24, 2005 03:19

All times are GMT -4. The time now is 07:17.