CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

MESH

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 8, 2005, 07:07
Default MESH
  #1
antonella
Guest
 
Posts: n/a
Hi guys! I have meshed a very complicated geometry, and it happens that the mesh is not attached to the boudary layer but directly to the wall in a small part of it. Fluent reads it and the checking is ok. So I would like to know if this can be a problem or not. Thanks in advance for all your help! Antonella
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] surface mesh merging problem everest ANSYS Meshing & Geometry 39 June 5, 2013 20:02
snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Native Meshers: snappyHexMesh and Others 2 March 27, 2011 22:11
Meshing aifoil in ICEM student123a ANSYS Meshing & Geometry 13 December 8, 2010 11:40
mesh missing after export in gambit morteza08 ANSYS Meshing & Geometry 1 July 26, 2010 02:10
2d irregular grid Remy Main CFD Forum 1 December 22, 2008 05:49


All times are GMT -4. The time now is 02:29.