CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

dynamic meshing

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 13, 2005, 10:27
Default dynamic meshing
  #1
pritam
Guest
 
Posts: n/a
hello i m using dynamic mesh model for analysis of i c engine my problem is at the time of mesh preview as soon as the piston is coming to the tdc at the end of compression stroke its creating negative cell volume(because at the same time valve opening event also starts and my clearance between the tdc and cyl head is less than 1 mm and cyl head is flat)is creating because of the geometry?and at layering is also not taking place.i m not getting where to play. if anybody is having material related to this problem plz forward me.plz do the needful thanks in advance pritam
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
dynamic meshing pronik_zoro ANSYS Meshing & Geometry 0 March 12, 2011 12:01
Dynamic meshing Manoj Kumar FLUENT 3 June 27, 2010 20:26
[GAMBIT] Dynamic Meshing of a combustion chamber donarundas ANSYS Meshing & Geometry 1 December 2, 2009 08:13
Issues with dynamic meshing sridhu88 FLUENT 1 June 11, 2009 17:46
dynamic meshing option arehman Main CFD Forum 4 June 27, 2004 03:55


All times are GMT -4. The time now is 06:34.