CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

interface errors

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 14, 2005, 13:15
Default interface errors
  #1
Sandra
Guest
 
Posts: n/a
Hi! I have been stuck for a while now and was wondering if there is anyone out there who can help. I've been trying to mesh a volume (tank) that is attached to a nozzle at the bottom. The mesh of the nozzle is very fine and the mesh of the tank doesn't need to be as fine (excpet at the walls). The nozzle and the tank need to be connected as I'm trying to monitor the nature of the flow coming from the nozzle interacting with the flow in the tank. I'm having troubles with the interface. The nozzle was split into fours (for better control of the mesh, the different faces were fused into an interior zone and when tested separately it works fine). The problem lies in adding the tank to the nozzle in order to observe the flow coming out of the nozzle. The following error occurs. Error: FLUENT received fatal signal (ACCESS_VIOLATION) 1. Note exact events leading to error. 2. Save case/data under new name. 3. Exit program and restart to continue. 4. Report error to your distributor. Error Object: () Depending on what I do different I occasionally get the poly triangulate error. Not sure what to do. Hope to hear from you. Sandra
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Building OpenFOAM1.7.0 from source ata OpenFOAM Installation 42 May 14, 2012 20:48
Upgraded from Karmic Koala 9.10 to Lucid Lynx10.04.3 bookie56 OpenFOAM Installation 8 August 13, 2011 04:03
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05
IcoFoam parallel woes msrinath80 OpenFOAM Running, Solving & CFD 9 July 22, 2007 02:58
Could anybody help me see this error and give help liugx212 OpenFOAM Running, Solving & CFD 3 January 4, 2006 19:07


All times are GMT -4. The time now is 12:27.