CFD Online Logo CFD Online URL
Home > Forums > FLUENT

non-conformal mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   July 15, 2005, 06:48
Default non-conformal mesh
Posts: n/a
I am working in a natural convection problem. I have a very complicate geometry, that I have meshed using non-conformal mesh. But displaying contours I have got some discontinuitys in temperature contours, in the boundaries of different volumes. How can I resolve this problems? I have tried to smoothing the transition between the different volumes.

Thank youŞ
  Reply With Quote

Old   July 15, 2005, 06:55
Default Re: boundary conditions in natural ventilation
Posts: n/a
I am working with fluent in natural ventilation problem, with Boussinesq aproximation. I have a heat source, and I want to get solution without definning inlet and outlet boundary conditions. I think taht the heat source must to force the air flow within the domain. Is it possible to simulate with fluent? How? I do not want to define velocity or pressure at the inlet, because I think this seting will have a decisive influence in the flow field.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
2D Mesh Generation Tutorial for GMSH aeroslacker Open Source Meshers: Gmsh, Netgen, CGNS, ... 12 January 19, 2012 04:52
engrid -> save as .stl with boundarie codes Zymon enGrid 31 August 29, 2011 13:40
Conformal Mesh in Multi Phase Flows ziyasaydam STAR-CCM+ 2 March 16, 2010 16:29
conformal vs. non conformal mesh otho Main CFD Forum 2 May 30, 2008 11:11
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55

All times are GMT -4. The time now is 11:34.