CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Extraction of Boundary Layer Characteristics from

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 20, 2005, 06:41
Default Extraction of Boundary Layer Characteristics from
  #1
C.Ortiz
Guest
 
Posts: n/a
I need to export the Fluent data set(3D) so I can post process it to obtain boundary layer parameters for all the curved walls in a rectangular corss-section duct, and I'm having problems with the data set fluent writes out. I normally choose the -ascii format with node values, and it gives the data set in some random format that I cannot order in an ijk type of data set. Is there a way to do this?
  Reply With Quote

Old   July 24, 2005, 06:57
Default Re: Extraction of Boundary Layer Characteristics f
  #2
Mehdi Ghoddosy
Guest
 
Posts: n/a
Dear Oritz:

It is better to define specific line or surfaces and export the 3D model data in these specific zones. However, if you want to export whole data use TECPLOT format. Then you can import in excel; here sorting these data and extraxting specific ijk could be done easily.

Best Regards Mehdi Ghoddosy
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[GAMBIT] problems in boundary layer yubaibai88 ANSYS Meshing & Geometry 8 April 19, 2010 21:07
Adapt mesh without modifying boundary layer cells? Freeman FLUENT 0 February 22, 2009 15:11
3D Boundary Layer Mario FLUENT 0 February 17, 2009 04:40
Please help with flow around car modelling! Tudor Miron CFX 17 March 19, 2004 20:23
boundary layer thickness 98.4F Main CFD Forum 1 December 29, 2000 08:23


All times are GMT -4. The time now is 07:12.