CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Error in viewing results

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 28, 2005, 13:53
Default Error in viewing results
  #1
Mukund
Guest
 
Posts: n/a
Hello,

I am having problems in viewing more than one result after completing my simulation. If I try to either zoom in or try to view anyother parameter after the first, I get this error message

"Error: Floating point error: invalid number

Error Object: ()"

and am forced to abort FLUENT. Any recommendations on this will help me a lot. Thanks.
  Reply With Quote

Old   July 29, 2005, 02:50
Default Re: Error in viewing results
  #2
CFD-novice
Guest
 
Posts: n/a
Could you please be a bit more specific about what you mean by 'viewing a result', 'viewing a parameter', 'zoom in'
  Reply With Quote

Old   July 29, 2005, 03:24
Default Re: Error in viewing results
  #3
Mukund
Guest
 
Posts: n/a
Once I am done with my simulation and go to view my results, i am able to display the countours for any parameter I choose, but if i try zooming into the same display to get a closer view at a particular region or try viewing another parameter, I get the error message as stated earlier and am forced to exit FLUENT. Thanks, Mukund
  Reply With Quote

Old   July 29, 2005, 13:00
Default Re: Error in viewing results
  #4
Allan Walsh
Guest
 
Posts: n/a
Are you using Windows or Linux system. With Windows, often I can't use the default graphics driver, depending on computer graphics card.

What version of Fluent? 6.2?
  Reply With Quote

Old   August 5, 2005, 12:41
Default Re: Error in viewing results
  #5
simo
Guest
 
Posts: n/a
I have this kind of error too. But I can't view any kind of results, even when I try to display the grid, after the grid-importing.

I use Fluent 6.2 in Windows XP home Ed with SP2. I suppose this error is a graphic error, but I'm not sure (my computer is a notebook, ACER 1680 with ATI radeon 9700)
  Reply With Quote

Old   August 6, 2005, 04:04
Default Re: Error in viewing results
  #6
Mukund Ravindran
Guest
 
Posts: n/a
Hello guys,

Thanks for all ur responses. I have managed to fix this problem. Well, I am using Fluent 6.1 on a windows OS. I figured that my video card driver was different from that which was required, so i downloaded it and installed the same and it worked. Hope your problems too get solved, I would certainly recommend that you check your display drivers. Regards, Mukund
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
OpenFOAM - Validation of Results Ahmed OpenFOAM Running, Solving & CFD 9 June 22, 2011 18:59
wind tunnel results vs fluent pixie Main CFD Forum 1 August 20, 2009 08:02
Velocity spots in openFoam results Valle OpenFOAM Running, Solving & CFD 4 August 19, 2009 05:53
How to plot a function over a time period? Cirion0000 CFX 4 July 18, 2009 12:48
Suitability of OpenDX for viewing CFX 4.3 results Jonathan Wall CFX 3 April 4, 2000 08:09


All times are GMT -4. The time now is 14:38.