CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

DEFINE_SOURCE

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 2, 2005, 06:05
Default DEFINE_SOURCE
  #1
CN
Guest
 
Posts: n/a
hi all

does anybody know how to apply the macro DEFINE_SOURCE to define mass source for the different phases in a multiphase model? How do I tell FLUENT if I want a wall to be sink for the primary phase only? Many thanks in advance.
  Reply With Quote

Old   August 2, 2005, 15:27
Default Re: DEFINE_SOURCE
  #2
Alec Eiffel
Guest
 
Posts: n/a
in the boundary conditions panel select the fluid zone. On the bottom of panel you can select which phase you require. select set and define the source term
  Reply With Quote

Old   August 5, 2005, 11:29
Default Re: DEFINE_SOURCE
  #3
CN
Guest
 
Posts: n/a
thanks Alec. By the way, have you done something similar before, i.e. simulating a separation process through a filter?
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 14:08.