CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

FLOW OVER A ROTOR

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 2, 2005, 21:28
Default FLOW OVER A ROTOR
  #1
RAJKUMAR
Guest
 
Posts: n/a
Plate with hinge is rotating about an axis with varying theta (0-90 deg) and this axis inside a blade is rotating completely with 50 rad/sec about another axis. Both axes are in one direction (Z-direction).

Geometry Description:

You can visualize this problem with ease. Take a drum and split it into 2 halves then stagger them to make S-type (Top view) by joining the two different side edges. Allow it to rotate in Air, due to difference in profiles, Concave and convex shapes will generate net drag in one direction. Now I want to make a hinge plate inside the concave shape. When the wind is in touch with the concave side it remains closed and when it is in touch with the convex side the blade starts rotate some angle (function of drag and centrifugal force of plate) to allow air to pass through the hole made in the drum blades.

So please give me some idea to model this problem in fluent.

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wave Rotor simulation popezmark OpenFOAM 8 February 4, 2014 19:00
Fully Developed Flow in Star-cd SMM STAR-CD 0 September 5, 2011 22:08
CFD analysis on wind turbine rotor Ken (Wind Turbine CFD Super Rookie) Main CFD Forum 42 July 18, 2011 22:11
Flow meter Design CD adapco Group Marketing CD-adapco 3 June 21, 2011 08:33
How to simulate the flow around a helicopter rotor cfd_newbie FLUENT 3 September 22, 2007 10:48


All times are GMT -4. The time now is 13:58.