|
[Sponsors] |
August 6, 2005, 00:20 |
combustion
|
#1 |
Guest
Posts: n/a
|
divergence detected in amg solver:species-0
|
|
August 9, 2005, 05:46 |
Re: combustion
|
#2 |
Guest
Posts: n/a
|
Hi Chandu The main reason of divergence in combustion is the size of your mesh, maybe your mesh size is too large to have a converged solution. Another option is the COURANT Number,you can decrese this parameter to a value about 0.001 manualy instead of changing it by solver during your solution process.
|
|
August 9, 2005, 06:37 |
Re: combustion
|
#3 |
Guest
Posts: n/a
|
how to change the courant number? thanks for replying.......
bye |
|
August 9, 2005, 12:22 |
Re: combustion
|
#4 |
Guest
Posts: n/a
|
Hi Go to: Solve ==> Control ==> Solution.... Bye
|
|
August 9, 2005, 23:51 |
Re: combustion
|
#5 |
Guest
Posts: n/a
|
thank u....... very much
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Modelling Combustion in Porous Zone | tanjinjack | FLUENT | 2 | September 26, 2016 04:10 |
hydrocarbon gases + Boron particle combustion | nileshjrane | OpenFOAM | 1 | December 13, 2010 06:20 |
Hydrogen Air combustion in a combustion chamber | popi | CFX | 7 | July 11, 2007 18:40 |
Need Similar Combustion Tutorial as my model | Arnab | Siemens | 0 | May 24, 2005 18:23 |
Multiresolution + Turbulence + Combustion | Raul | Main CFD Forum | 0 | March 18, 2005 07:53 |