CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

set the reference static pressure

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 8, 2005, 03:55
Default set the reference static pressure
  #1
frank
Guest
 
Posts: n/a
Dear all,

I want to set the reference static pressure as the static pressure above the boundary layer for an external flow problem. How could I achieve this in FLUENT? Could any expert could me a hand on that?
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
It would be wonderful if a tool for FoamToTecplot is available luckyluke OpenFOAM Post-Processing 165 November 27, 2012 07:54
about reference pressure in CFX adam2008 CFX 0 May 14, 2011 22:14
Installing OpenFOAM-1.5-dev on a cluster ZKM OpenFOAM Installation 4 December 25, 2010 16:59
OpenFoam-1.7.x on Suse 11.2 (64bit) does not compile val46 OpenFOAM Installation 4 August 27, 2010 03:43
Does star cd takes reference pressure? monica CD-adapco 1 April 19, 2007 11:26


All times are GMT -4. The time now is 18:48.