CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

combustion

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 9, 2005, 06:43
Default combustion
  #1
chandu
Guest
 
Posts: n/a
iam doing laminar non premixed combustion. i have done the cold flow simulation.can any one tell how to proceed to combustion modeling .

bye

  Reply With Quote

Old   August 9, 2005, 11:07
Default Re: combustion
  #2
Swarup
Guest
 
Posts: n/a
I guess you set-up a complete model and included all specific requirements of the flamelet model including reaction. then,you turned them OFF and ran your simulation. this gave you a converged flow field. if this is what you did, then further things are: save the results of cold flow simulation in .dat file. turn ON all your reaction inputs and energy inputs. read the newly saved data file to start with the already known flow pattern and start the simulation. your source terms and energy equation will couple with the other equations.

Regards,

Swarup.
  Reply With Quote

Old   August 9, 2005, 11:09
Default Re: combustion
  #3
chandu
Guest
 
Posts: n/a
thank u
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
hydrocarbon gases + Boron particle combustion nileshjrane OpenFOAM 1 December 13, 2010 07:20
Modelling Combustion in Porous Zone tanjinjack FLUENT 0 November 19, 2010 12:23
Hydrogen Air combustion in a combustion chamber popi CFX 7 July 11, 2007 18:40
Need Similar Combustion Tutorial as my model Arnab CD-adapco 0 May 24, 2005 18:23
Multiresolution + Turbulence + Combustion Raul Main CFD Forum 0 March 18, 2005 08:53


All times are GMT -4. The time now is 15:43.