CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

dynamic meshing

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 16, 2005, 17:12
Default dynamic meshing
  #1
shiva
Guest
 
Posts: n/a
i am simulating a rotating and translating rigid body in a fluid zone using dynamic mesh. the velocities are constant. the mesh works for a short while if i use a small time step like 10e-3, but after that mesh fails. it is a 3d model. can anyone give me some suggestions as to how i can custom smoothen/remesh it after a few timesteps or something like that so that my dynamic mesh doesnt fail?
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
dynamic meshing pronik_zoro ANSYS Meshing & Geometry 0 March 12, 2011 12:01
Dynamic meshing Manoj Kumar FLUENT 3 June 27, 2010 19:26
[GAMBIT] Dynamic Meshing of a combustion chamber donarundas ANSYS Meshing & Geometry 1 December 2, 2009 08:13
Issues with dynamic meshing sridhu88 FLUENT 1 June 11, 2009 16:46
dynamic meshing option arehman Main CFD Forum 4 June 27, 2004 02:55


All times are GMT -4. The time now is 05:11.