|
[Sponsors] |
September 28, 2010, 22:17 |
problem during UDF rebuild
|
#1 |
Member
Dokeun, Hwang
Join Date: Apr 2010
Location: Korea, Republic of
Posts: 98
Rep Power: 16 |
Hi there
I want to modify profile.c which was loaded. First, I unload my old udf and tried to build profile.c again but it didn't work with the error message below. ------------------------------------------------------ wrong commend <- first 4 messages are translated in english by myself. file name, directory name or volume labels are wrong. can't find network path 0 files are copied Error: sopenoutputfile: unable to open file for output Error Object: "ntx86\2ddp_host\user_nt.udf" ------------------------------------------------------ How can I rebuild&reload my modified profile.c? |
|
September 28, 2010, 22:51 |
|
#2 |
New Member
srr
Join Date: Feb 2010
Posts: 25
Rep Power: 16 |
I had a similar problem but I didn't get that message, what I did was close FLUENT and delete the folder called libudf, and then open again the software and build it again.
I am not sure if this is the answer to your question, anyway I hope this helps. |
|
September 29, 2010, 07:36 |
|
#3 |
Member
Dokeun, Hwang
Join Date: Apr 2010
Location: Korea, Republic of
Posts: 98
Rep Power: 16 |
That's somewhat different from what I've done till now...
Thanks for sharing your experence. It was helpful for me. =) |
|
September 29, 2010, 21:38 |
|
#4 |
Member
Dokeun, Hwang
Join Date: Apr 2010
Location: Korea, Republic of
Posts: 98
Rep Power: 16 |
I guess I get an adhoc for this problem
After modifing the UDF, rebuilding as another libudf name(if former libudf was "libudf" then new one would be "libudf_new" or something) can avoid any error occure. I checked this out in linux. I'm not sure that it works at PC but, it may work too. Thanks again |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ATTN ALL: SOLUTON TO UDF COMPILE PROBLEM | Rizwan | Fluent UDF and Scheme Programming | 40 | March 18, 2018 06:05 |
Problem with my udf | july | Fluent UDF and Scheme Programming | 3 | June 20, 2010 06:56 |
udf compiling problem | akr | FLUENT | 3 | August 22, 2007 07:14 |
Problem related with UDF for dynamic mesh | Ryan | FLUENT | 6 | April 29, 2004 09:29 |
UDF problem | chiseung | FLUENT | 4 | January 10, 2002 09:58 |