CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Enable combustion models (http://www.cfd-online.com/Forums/fluent/37979-enable-combustion-models.html)

Swarup September 22, 2005 12:24

Enable combustion models
 
Dear All!

I want to use a combustion model. How do I activate it? The TUI says these models are currently "disabled". What does it mean? I tried using the particular command say: "premixed-combustion?" in the species menu.In response, I get a "Invalid Command" message. Why this is happening? Is this due to incomplete installation OR combustion models are to be activated differently? Can it be because I am not supplied with thiese models due to licensing terms i.e. they need some special license?

any advice is highly appreciated.

Thanx for all your help!

Swarup.

Razvan September 23, 2005 04:27

Re: Enable combustion models
 
Did you enabled species transport (define\models\species\transport&reaction)?

If not, that's the source of your problem.

Razvan

Swarup September 23, 2005 07:29

Confusion cleared
 
Thanx a lot for your suggestion. I got help from FLUENT Support team.

Swarup.


All times are GMT -4. The time now is 12:05.