|
[Sponsors] |
Skipping zone air_inlet (not referenced by grid) |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 1, 2005, 17:48 |
Skipping zone air_inlet (not referenced by grid)
|
#1 |
Guest
Posts: n/a
|
Helo,
I'm trying to make very simple geometry in Gambit. The column with small air inlet in the bottom. The problem is with the bottom of course. I use cylinder (column) and circle (air inlet) at the bottom face. Everything is meshed and exported to file.msh. Then loading it to the Fluent I got the message "Skipping zone air_inlet (not referenced by grid)". So that circle at the bottom face is deleted - it is not visible by Fluent. What am I making wrong? Thanks in advance Maciej |
|
October 2, 2005, 06:58 |
Re: Skipping zone air_inlet (not referenced by gri
|
#2 |
Guest
Posts: n/a
|
Sounds like a connectivity problem. Go back to gambit and check if your air inlet circle is connected with the bottom of your column. There is a connectivity button somewhere in the lower right corner of gambit. Turn it on and the small air inlet circle should turn to pink if everything is all right. If its blue then you havent it connected properly.
RoM |
|
November 19, 2010, 13:05 |
|
#3 |
New Member
Lorreine
Join Date: Aug 2010
Posts: 4
Rep Power: 15 |
Hi,
I am facing the same problem as Maciej. My inlet was not referenced by grid when loaded into fluent as well. When i check, it IS in pink but the problem persists. Could there be another reason or something i missed? Thanks! |
|
November 19, 2010, 15:11 |
Skipping zone air_inlet (not referenced by grid)
|
#4 |
New Member
mojtaba
Join Date: Nov 2010
Posts: 25
Rep Power: 15 |
Hi
I think if you change your mesh to another type of mesh, this problem will be solved. Last edited by mojtaba1365; November 19, 2010 at 15:33. |
|
January 15, 2012, 18:42 |
|
#5 | |
New Member
Join Date: Apr 2011
Posts: 29
Rep Power: 14 |
Quote:
Last edited by tom634; January 15, 2012 at 19:58. |
||
January 17, 2012, 20:57 |
|
#6 |
Member
Dmitry
Join Date: Nov 2011
Posts: 45
Rep Power: 14 |
hey, ANSYS workbench v13 will resolve all of your issues ..
|
|
January 18, 2012, 05:38 |
d
|
#7 |
New Member
mojtaba
Join Date: Nov 2010
Posts: 25
Rep Power: 15 |
please more explain.
|
|
January 18, 2012, 07:34 |
|
#8 |
New Member
Join Date: Apr 2011
Posts: 29
Rep Power: 14 |
For me- changing Mesh type between Tet/Hex helped.
|
|
November 13, 2012, 04:42 |
To the skipping problem
|
#9 |
New Member
Lotte
Join Date: Nov 2012
Posts: 4
Rep Power: 13 |
As I was looking for what has been wrong, I found that my mesh has been not written completely in Gambit, so the non-written part of the mesh will be skipped in the fluent though there has been boundary condition you set there.
Wish you good luck~ |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem in running ICEM grid in Openfoam | Tarak | OpenFOAM | 6 | September 9, 2011 18:51 |
skipping zone... (not referenced by grid) | bigmoneylou | ANSYS Meshing & Geometry | 1 | December 21, 2010 13:50 |
Skipping zone inlet (not referenced by grid) | vinoo | FLUENT | 7 | February 18, 2010 20:05 |
how to get rid of skipping thread 5 of domain field-1 (not referenced by grid) | smkhan | FLUENT | 0 | November 16, 2009 05:20 |
Problem in IMPORT of ICEM input file in FLUENT | csvirume | FLUENT | 2 | September 9, 2009 02:08 |