|
[Sponsors] |
Setting Boundary Conditions (pretty pictures!) |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 6, 2005, 16:23 |
Setting Boundary Conditions (pretty pictures!)
|
#1 |
Guest
Posts: n/a
|
Hi guys,
I am trying to simulate a forward aircraft fuselage with a intake duct mounted on the side. Refer to this simplified picture for reference: http://www.100megsfree.com/maverick/CFD/DAI-C%20Boundary%20Question.jpg Is this the correct B.C.? Can I use Pressure Far Field in combination with Pressure Outlets? Thanks Riaan |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Domain Imbalance | HMR | CFX | 5 | October 10, 2016 05:57 |
symmetry boundary conditions in cfx | lost.identity | CFX | 41 | May 22, 2013 07:21 |
inlet velocity boundary condition | murali | CFX | 5 | August 3, 2012 08:56 |
Reading field values and setting them as boundary conditions | sega | OpenFOAM Running, Solving & CFD | 1 | July 7, 2009 06:18 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 04:15 |