applying results as b.c on some other model

October 10, 2005, 02:16

can anybody help me, is this possible to apply results from one case to the other case as b.c (e.g. temp)?

October 10, 2005, 03:39

Use file->write profile to export profiles on boundaries and use file->read profile ro read it into your new case. The profile will then become available as a boundary condition.

RoM

October 10, 2005, 06:36

thank u very much, thankalot. its fine. that means, from this we can get any value, is it?

October 10, 2005, 07:03

I have used it for temperature, velocity and turbulence (k-e). I think it will work for all the values that you can export.

RoM

October 10, 2005, 02:16	applying results as b.c on some other model	#1
manohar Guest Posts: n/a	can anybody help me, is this possible to apply results from one case to the other case as b.c (e.g. temp)?

October 10, 2005, 03:39	Re: applying results as b.c on some other model	#2
RoM Guest Posts: n/a	Use file->write profile to export profiles on boundaries and use file->read profile ro read it into your new case. The profile will then become available as a boundary condition. RoM

October 10, 2005, 06:36	Re: applying results as b.c on some other model	#3
manohar Guest Posts: n/a	thank u very much, thankalot. its fine. that means, from this we can get any value, is it?

October 10, 2005, 07:03	Re: applying results as b.c on some other model	#4
RoM Guest Posts: n/a	I have used it for temperature, velocity and turbulence (k-e). I think it will work for all the values that you can export. RoM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Atomization and Breakup model	xck1986	OpenFOAM	4	May 31, 2014 04:43
Water subcooled boiling	Attesz	CFX	7	January 5, 2013 03:32
Problems bout CFD model of biomass gasification, Downdraft gasifier	wanglong	FLUENT	2	November 25, 2009 23:27
DPM model w/ Wave model - errors in documentation	HS	FLUENT	0	April 12, 2006 04:37
How to define dynamic mesh model B.C using Profile	David	FLUENT	3	February 18, 2004 16:57