CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Can laminar model simulate flow with Re=20000

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 10, 2005, 14:30
Default Can laminar model simulate flow with Re=20000
  #1
Baicang
Guest
 
Posts: n/a
Hello, I want to know that if laminar model can simulate flow with Reynolds number up to 20000, a free surface exists in my calculation case.

Thanks in advance!
  Reply With Quote

Old   November 14, 2005, 12:14
Default Re: Can laminar model simulate flow with Re=20000
  #2
Evan Rosenbaum
Guest
 
Posts: n/a
Sure, it will just simulate it as laminar.
  Reply With Quote

Old   November 14, 2005, 12:57
Default Re: Can laminar model simulate flow with Re=20000
  #3
Baicang
Guest
 
Posts: n/a
Would you like to explain it more concretely? By now I introduce a const eddy viscosity Reynolds number to the whole computation domain,and a reasonable result is obtained.A simple turbulent model is adopted in this way. How do you think it? Thanks very much for your discussion.
  Reply With Quote

Old   November 15, 2005, 10:49
Default Re: Can laminar model simulate flow with Re=20000
  #4
Jeremy
Guest
 
Posts: n/a
What Evan is saying is that you can always use a laminar model and it will give you results. The results may not accurately predict the 'real' situation, but it would predict a turbulent free situation. For example, you could simulate simple pipe flow with a laminar model for a Reynolds number of 50 000. Would the results mean anything? For most practical purposes, at such a high Reynolds number the flow should be turbulent, however there have been some very carefully performed experiments were laminar flow in straight pipes have achieved Reynolds numbers in the 10s of thousands, but those are under very special conditions with very smooth pipe walls and minimal vibrations of the pipe and so forth. Any small perturbation of the flow would quickly send it into a turbulance.

Can a Reynolds number of 20 000 be used in your case? Possibly, but to figure this out you are best to check the literature for similar situations. Has there been experimental work done on the same geometry? Is there any published data to indicate when the onset of transition begins? Someone on this forum might know the answer to this, but you would probably have to give a better description of the geometry and flow in order to evaluate your situation.

  Reply With Quote

Old   November 17, 2005, 11:39
Default Re: Can laminar model simulate flow with Re=20000
  #5
Baicang
Guest
 
Posts: n/a
Thanks for Evan and Jeremy's help Now I adopt a const eddy viscosity in the whole computational domain, it means I employ a very simple turbulent model to solve my problem, the results show that this method is feasible. Although this method isn't as good as k-epsilon model, it can save a lot of computational time. How do you think this strategy? Baicang
  Reply With Quote

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CFX Treatment of Laminar and Turbulent Flows Jade M CFX 18 September 15, 2022 07:08
Using a turbulent model when the flow is entirely laminar. mwhyte FLUENT 1 June 7, 2012 10:35
Modelling roughness with a laminar flow in Fluent 1000sh Main CFD Forum 0 April 16, 2010 14:41
Validation for laminar Disperse phase flow shashwat Main CFD Forum 0 April 4, 2008 02:20
Baldwin-Lomax model in wall jet flow K.S.Chang Main CFD Forum 0 December 7, 2005 01:51


All times are GMT -4. The time now is 23:23.