CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   The error message about interface (https://www.cfd-online.com/Forums/fluent/38673-error-message-about-interface.html)

braket November 20, 2005 00:14

The error message about interface
 
Hi, everyone

I am a greenhand in the FLUENT, and I need your help. I will appreciate it.

My model description ======================== In my model, I set two parts, one is channel and the other is diffusion layer which lies on the top of the channel. So I draw the two parts and put them together, and set the surfaces between them as the interface.

Problem description ======================== After set the boundary condition, and then initiate the model. The console shows the error message

WARNING: Unassigned interface zone detected for interface 6 Error: Init_Flow: unassigned interface_zones Error Object: ()

What's wrong with the model? What parameters need I change to correct the error? what mean's "Init_Flow"? Need I initiate the interface condition? If it is, how do I set the parameters of interface?

Thank you very much! Braket



All times are GMT -4. The time now is 13:56.