CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

The error message about interface

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 20, 2005, 00:14
Default The error message about interface
  #1
braket
Guest
 
Posts: n/a
Hi, everyone

I am a greenhand in the FLUENT, and I need your help. I will appreciate it.

My model description ======================== In my model, I set two parts, one is channel and the other is diffusion layer which lies on the top of the channel. So I draw the two parts and put them together, and set the surfaces between them as the interface.

Problem description ======================== After set the boundary condition, and then initiate the model. The console shows the error message

WARNING: Unassigned interface zone detected for interface 6 Error: Init_Flow: unassigned interface_zones Error Object: ()

What's wrong with the model? What parameters need I change to correct the error? what mean's "Init_Flow"? Need I initiate the interface condition? If it is, how do I set the parameters of interface?

Thank you very much! Braket

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind turbine simulation Saturn CFX 58 July 3, 2020 02:13
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05
CFX Solver Memory Error mike CFX 1 March 19, 2008 08:22
Convective Heat Transfer - Heat Exchanger Mark CFX 6 November 15, 2004 16:55
Replace periodic by inlet-outlet pair lego CFX 3 November 5, 2002 21:09


All times are GMT -4. The time now is 02:50.