CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

EULER simulation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 7, 2005, 13:18
Default EULER simulation
  #1
Alexandre
Guest
 
Posts: n/a
Hi, I want to simulate an EULER's flow on a plane. Could you explain me the various stages to be followed! Both grid and boundary conditions (wall, sym.,Pressure_inlet, Pressure_outlet) are made with Gambit. I would like just the differents steps with Fluent! (N.B: absolute speed is 340 m/s) Thank you for your help!

Alexandre.
  Reply With Quote

Old   November 8, 2005, 03:59
Default Re: EULER simulation
  #2
Alexandre
Guest
 
Posts: n/a
Please, it's very important! Help me! Alexandre.
  Reply With Quote

Old   November 8, 2005, 05:49
Default eulerian's simulation
  #3
Alexandre
Guest
 
Posts: n/a
Hi, I want to simulate an EULER's flow on a plane. Could you explain me the various stages to be followed! Both grid and boundary conditions (wall, sym.,Pressure_inlet, Pressure_outlet) are made with Gambit. I would like just the differents steps with Fluent! (N.B: absolute speed is 340 m/s) Thank you for your help!

Alexandre.

  Reply With Quote

Old   November 8, 2005, 06:24
Default Re: eulerian's simulation
  #4
HVN
Guest
 
Posts: n/a
About mesh, there are the following tutorials of gambit that could help you: 5, 6 and 14. About fluent, you should try the tutorial 3.

HV
  Reply With Quote

Old   November 24, 2005, 15:01
Default Re: eulerian's simulation
  #5
Riaan
Guest
 
Posts: n/a
Check out the Full Multigrid Initialization in Fluent - this solves the EULER equations to give a better starting point for the Navier-Stokes solver.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Why my simulation not agree with the wind tunnel experiment zhaowei CFX 4 July 11, 2015 04:36
Simulation of a complex wing in solidworks flow simulation niels1900 FloEFD, FloWorks & FloTHERM 6 April 20, 2011 11:44
GUI crash and simulation engine still running RPJones FLOW-3D 2 November 9, 2010 09:18
velocity profile export from a simulation onto another sudhirlv STAR-CCM+ 1 September 12, 2010 19:57
strange simulation error Ralf Schmidt FLUENT 2 May 4, 2007 14:02


All times are GMT -4. The time now is 11:35.