CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Do i need to use tmerge when you using sliding mes

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 1, 2005, 07:28
Default Do i need to use tmerge when you using sliding mes
  #1
jan
Guest
 
Posts: n/a
Hi, I am working with a stirred tank reactor. I have created two interfaces(one around the impeller(the rotating volume) and the other in the tank(stationary).

I will like to ask:

Do i need to use tmerge in FLUENT before i use sliding mesh concept?

I am confused because i prepared for simulation by linking the two interfaces using define- grid interfaces.

Pls need yr advice
  Reply With Quote

Old   December 1, 2005, 07:54
Default Re: Do i need to use tmerge when you using sliding
  #2
zxaar
Guest
 
Posts: n/a
nope, just define them interface and join them (as interface) before you start the calculation, you have to name the zone you want to move and define its motion, its simple.
  Reply With Quote

Old   December 2, 2005, 10:07
Default Re: Do i need to use tmerge when you using sliding
  #3
jan
Guest
 
Posts: n/a
Thanks. Well appreciated.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Sliding mesh and Momentum Theory Lam FLUENT 2 February 21, 2013 17:08
sliding mesh, confused me, help! help! weiyang1980 FLUENT 2 September 30, 2009 22:45
Intersecting sliding interface jaswi OpenFOAM Running, Solving & CFD 0 February 15, 2008 01:07
Sliding Mesh Sridhar FLUENT 0 August 23, 2002 15:54
Sliding box validation required Glenn Horrocks Main CFD Forum 1 March 1, 1999 08:00


All times are GMT -4. The time now is 12:27.