CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Gambit: face mesh starts at edge, not boundary lr

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 5, 2005, 14:50
Default Gambit: face mesh starts at edge, not boundary lr
  #1
Chris Bailey
Guest
 
Posts: n/a
I often get myself into this situation without seeing how. In meshing a 2D model, I mesh an edge, put a boundary layer on it, then mesh the other edges. When I finally mesh the face, this face mesh goes all the way to the edges, ignoring the boundary layer. Now I have two distinct meshes near the important edge (one displays yellow, one displays white).

What am I doing wrong? Sometimes I think I get what I want and sometimes I get this - I haven't noticed whatever it is I'm doing that makes the difference.

Thanks!
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind turbine simulation Saturn CFX 58 July 3, 2020 02:13
[Netgen] Import netgen mesh to OpenFOAM hsieh OpenFOAM Meshing & Mesh Conversion 32 September 13, 2011 06:50
Not able to mesh a helix with boundary layer using gambit rohitjvbibin FLUENT 1 March 7, 2011 05:40
Gambit face meshing with a common edge stella FLUENT 1 October 28, 2005 06:09
How to control Minximum mesh space? hung FLUENT 7 April 18, 2005 10:38


All times are GMT -4. The time now is 10:22.