automatic surface creation
 

I have 2d mesh with 500 points in axial direction and 200 radial direction.

Now I would like to plot Temperature over all the radial profile(200 points) on every x that means(500 points).

Now everybody agress it is difficult create 500 surface by hand. so what I tried is to interpolate the Temeparetaure field on to some other mesh but in my steady since the errors in interpolation I could not satisfactory results.

I would like to know is it possible to make surface creation automatic either by using UDF or someother methods.

Anybody help me please. Your help is much apreciated.

Q

Re: automatic surface creation
 

use udf create a boundary profile but your discription is not clear bye

Re: automatic surface creation
 

Could you tell me atleast what is not clear. I want to get the radial profiles of the Temp at each x nodes.

Q

Re: automatic surface creation
 

Ok use Define profile in UDF then interprted your code bye

Re: automatic surface creation
 

hello what you are talking about can be done when u are starting the calculations what I asking is about postprocessing stage. If you dont know please refrain from asnwering it. Q

Re: automatic surface creation
 

Ok I apologize. I dont answer any question of you goodluck

Re: automatic surface creation
 

i think you shall be able to create them in journal file and export the results on them as you need.

I guess this is easiest way of doing it.