CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

automatic surface creation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 4, 2005, 09:19
Default automatic surface creation
  #1
Q
Guest
 
Posts: n/a
I have 2d mesh with 500 points in axial direction and 200 radial direction.

Now I would like to plot Temperature over all the radial profile(200 points) on every x that means(500 points).

Now everybody agress it is difficult create 500 surface by hand. so what I tried is to interpolate the Temeparetaure field on to some other mesh but in my steady since the errors in interpolation I could not satisfactory results.

I would like to know is it possible to make surface creation automatic either by using UDF or someother methods.

Anybody help me please. Your help is much apreciated.

Q
  Reply With Quote

Old   December 5, 2005, 02:23
Default Re: automatic surface creation
  #2
nasser
Guest
 
Posts: n/a
use udf create a boundary profile but your discription is not clear bye
  Reply With Quote

Old   December 5, 2005, 05:17
Default Re: automatic surface creation
  #3
Q
Guest
 
Posts: n/a
Could you tell me atleast what is not clear. I want to get the radial profiles of the Temp at each x nodes.

Q
  Reply With Quote

Old   December 5, 2005, 05:31
Default Re: automatic surface creation
  #4
nasser
Guest
 
Posts: n/a
Ok use Define profile in UDF then interprted your code bye

  Reply With Quote

Old   December 5, 2005, 11:07
Default Re: automatic surface creation
  #5
Q
Guest
 
Posts: n/a
hello what you are talking about can be done when u are starting the calculations what I asking is about postprocessing stage. If you dont know please refrain from asnwering it. Q
  Reply With Quote

Old   December 6, 2005, 02:42
Default Re: automatic surface creation
  #6
nasser
Guest
 
Posts: n/a
Ok I apologize. I dont answer any question of you goodluck
  Reply With Quote

Old   December 6, 2005, 03:57
Default Re: automatic surface creation
  #7
zxaar
Guest
 
Posts: n/a
i think you shall be able to create them in journal file and export the results on them as you need.

I guess this is easiest way of doing it.

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Error : Self intersecting surface mesh, computing intersections & Error : Impossible velan Open Source Meshers: Gmsh, Netgen, CGNS, ... 1 July 14, 2015 05:54
Problem with Gmsh nishant_hull Open Source Meshers: Gmsh, Netgen, CGNS, ... 18 April 22, 2015 08:43
problem with surface creation in ICEM from multiple curves dialolema ANSYS Meshing & Geometry 2 October 27, 2014 14:14
[ICEM] Automatic mesh generation script surface intersection problem stuart23 ANSYS Meshing & Geometry 0 May 13, 2011 01:10
CFX4.3 -build analysis form Chie Min CFX 5 July 12, 2001 23:19


All times are GMT -4. The time now is 03:46.