CFD Online URL
[Sponsors]
Home > Forums > FLUENT

pressure swirl atomizer in 2d Axisymmetric

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 6, 2005, 01:10
Default pressure swirl atomizer in 2d Axisymmetric
  #1
kev
Guest
 
Posts: n/a
Hi all,

Has anyone simulated the pressure swirl atomizer model within a 2D axisymmetric domain. I have a rectangular domain and every time i run the atomizer model it doesn't seem to look like a spray, as it doesnt disperse outwards. Is this normal for the axisymmetric domain? In 3-D however I can see a dispersion. I have tried with unsteady and steady case. My conditions are based on fuel injection applications.

Thanks for reading.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Calculation of the Governing Equations Mihail CFX 7 September 7, 2014 07:27
pressure correction for axisymmetric 2d navier stokes new_at_this Main CFD Forum 0 October 17, 2011 18:20
Pressure Swirl Atomizer Vijay FLUENT 0 August 8, 2011 12:12
Pressure Swirl Atomizer Vijay FLUENT 0 August 5, 2011 14:49
Neumann pressure BC and velocity field Antech Main CFD Forum 0 April 25, 2006 03:15


All times are GMT -4. The time now is 23:08.