CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Species Mass Transfer (http://www.cfd-online.com/Forums/fluent/38885-species-mass-transfer.html)

Abu-Khawlah December 9, 2005 11:35

Species Mass Transfer
 
Hi,

I am using the Define_Mass_transfer UDF to allowed the transfer of species 1 in phase into species 1 in phase 2 at the same cell. I calculate using outside sources the actual mass in (kg) of species 1 that sould be transfer at each single cell of the system. However, this UDF macro is return a real mass rate (Kg/m3-sec) to the solver, so I need to convert the real mass value (Kg) I get for each cell into a mass rate, which I could not manage to do correctly, Actally I do it as follow, but it seems incorrect. Please advice me.

mass_rate = (species_mass_(kg))/[(Cell_volume)*transfer time]

Regards

AbuKhawlah


All times are GMT -4. The time now is 20:11.