CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

increaseing vol frac after x iterations

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 13, 2005, 22:28
Default increaseing vol frac after x iterations
  #1
Rashmi
Guest
 
Posts: n/a
hi all

can anyone tell me how do i write the udf for increasing the volume fraction of the dispersed phase after x iterations. i want to increase the volume fraction from 0 to 45% and monitor the pressure to get the phase inversion point.how can one monitor the effective viscosity of the mixture which is greater than mixture viscosity.

is there any way of getting the drop distribution and sauter mean dia of the drops.because there is no PBE model in fluent 6.2....

any suggestions are welcome thanks in advance Rashmi
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 06:20
Upgraded from Karmic Koala 9.10 to Lucid Lynx10.04.3 bookie56 OpenFOAM Installation 8 August 13, 2011 04:03
Orifice Plate with a fully developed flow - Problems with convergence jonmec OpenFOAM Running, Solving & CFD 3 July 28, 2011 05:24
Extrusion with OpenFoam problem No. Iterations 0 Lord Kelvin OpenFOAM 6 April 12, 2011 11:24
Differences between serial and parallel runs carsten OpenFOAM Bugs 11 September 12, 2008 11:16


All times are GMT -4. The time now is 19:17.