CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Blowing solution!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 2, 2006, 12:48
Default Blowing solution!
  #1
Thiyaga
Guest
 
Posts: n/a
Hi all,

iam working on air filters and i use porous volume formulation for modelling the filter media.I use DPM for modelling the sand particles.I will get the value of sand that deposited on the filter surface with my UDF's and i will store the value of sand collected in a user defined memory. The resistance coefficients of the filter media (porous volume) are varied with respect to the amount of sand deposited. The source term is calculated from the resistance coefficients and included into the standard momentum equations.So the increasing pressure drop across the filter media is predicted. The problem iam facing is when the source term increases, after certain iterations the solution starts blowing i.e the residual values of continuity and velocities increase drastically and soon iam getting floating point error. how to overcome this?

Thanks for your time.. regards Thiyaga.
  Reply With Quote

Old   June 12, 2009, 23:12
Default
  #2
New Member
 
lele
Join Date: May 2009
Posts: 2
Rep Power: 0
yingfei1001 is on a distinguished road
hi
how i can keep in contact with you?
i am doing the same thing as you!
yingfei1001 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Integrated conjugate heat transfer solver in OpenFOAM hjasak OpenFOAM Running, Solving & CFD 168 June 27, 2013 01:56
IcoFoam parallel woes msrinath80 OpenFOAM Running, Solving & CFD 9 July 22, 2007 02:58
solution singularity litonx OpenFOAM Running, Solving & CFD 1 February 21, 2007 02:32
Mesh independent solution CFX Begineer CFX 0 October 27, 2002 11:54
Discussion about Mesh independant solution Seb Main CFD Forum 13 May 22, 2001 13:37


All times are GMT -4. The time now is 07:54.