CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Mass Flow Phase Shift

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 2, 2006, 19:20
Default Mass Flow Phase Shift
  #1
Ryan
Guest
 
Posts: n/a
All

I am presently trying to simulate the fluid motion in a simple thermoacoustic refrigerator (pulse-tube). I need to specify an oscillating pressure at one end of a simple tube along with a mass flow rate that is phase shifted by x degrees. I am curious if anyone has done this before. Any help would be greatly appreciated.

Thanks Ryan
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
UDF for transient pressure inlet, mass flow check at nozzle exit and volumetric heat kokoory FLUENT 0 August 17, 2011 02:07
negative global mass flow rate Gimli FLUENT 0 April 21, 2006 07:17
Mass Flow Inlet Pravir Kumar Rai FLUENT 0 February 17, 2003 19:23
How to obtain mass flow rate of one phase Derek Jing FLUENT 1 May 31, 2002 13:18
mass flow rate of a dispersion phase Paul FLUENT 1 February 25, 2002 23:19


All times are GMT -4. The time now is 15:43.