CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Help: LDO injection

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 16, 2006, 04:44
Default Help: LDO injection
  #1
sonal
Guest
 
Posts: n/a
I have rectangular combustion chamber whoich is fully insulated. I want to carry out non-premixed combustion using LDO as the fuel.I have give air and fuel velocity in the boundary conditions as 6.8 and 34.34 m/sec.In the injection also I have give velocity as 34.34m/sec and fuel oil liquid is taken as the droplet particle havingf the diameter of 0.0003m.the radiation model selected is P1.I want to know whether to give same velocity in the injection and fuel_in boundary condition.With the conditions given above i am not getting converged solution and the temperature distribution is also not proper. Please help me to slve this problem. Thanking you.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
surface injection or point injection? sukura_1984 FLUENT 0 September 2, 2009 10:26
Spray Injection usker Siemens 2 April 6, 2007 01:41
On DPM injection properties. akr FLUENT 4 October 23, 2006 11:54
DPM, UDF, Injection Type Zhang FLUENT 0 June 8, 2005 16:51
using injection file and parallel process Cindy Jones FLUENT 0 January 23, 2003 13:40


All times are GMT -4. The time now is 06:52.