CFD Online Logo CFD Online URL
Home > Forums > FLUENT

how to do blade passage analysis of turbine?

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   January 17, 2006, 23:49
Default how to do blade passage analysis of turbine?
Posts: n/a
Hi i am doing flow analysis of single blade passage .I am using folowing strategies but nothing works.pls help me in this regard.Total Pressure at inlet is 2.83 bar,Total temp =923 K inlet flow velocity=125 m/sec.Out totoal pr=1.12 bar.,total temp=760 K,Velocity=125 m/sec.rotational speed of passge=60,000 rpm (6280 rad/sec).mas flow =0.596 kg/sec.What i am doing is first giving less rotational speed and when it converges increases speed in next run by taking initial file of prevouis. (1)when i am giving inlet pressure and outlet poressure wit h steady condition and speed as 100 rad/sec.the flo w is cinserved.but real mass flow at inlet and outlet is not achived. it is in terms of thousands insread actual valkue 0.596 kg/sec. (2) when i am giving unsteady solutuion directly without doing steady solution then it says divergence detected in AMG solver.I am reducing underrelaxation parametrs but notjing works.temeprature limit also crosses 5000. so pls tell me which boundary conditon shouls be applied.also shoud i first do steady analysis and then transient analysis.or directly unsteady analysis. thanking u all.

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help Required on CFD for Turbine Blade Analysis kkjj2008 CFX 4 July 12, 2009 16:42
Flow study through Turbine Blade passage Subrata FLUENT 1 May 4, 2007 11:28
BCs for a turbine blade passage Babu FLUENT 0 December 12, 2006 12:25
how to d othis blade passage analysis ?pls he kaen CD-adapco 2 January 24, 2006 06:41
how to do this turbine blade passage flow nanlysis kaen CFX 0 January 17, 2006 23:50

All times are GMT -4. The time now is 14:44.