CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Heat Transfer from Solid To Liquid!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 19, 2006, 18:52
Default Heat Transfer from Solid To Liquid!
  #1
Richard
Guest
 
Posts: n/a
I must be doing something wrong here! Im not getting any heat flux across the interface between solid and liquid! Ive set it as a coupled interface, so Im not sure why theres no heat flux.
  Reply With Quote

Old   January 20, 2006, 06:43
Default Re: Heat Transfer from Solid To Liquid!
  #2
Laika
Guest
 
Posts: n/a
Why do you believe there is no heat flux? Because you don't see any in the contour plots, or because the numerical value reported by Fluent for the heat flux is exactly 0.

Is is a stationary calculation or transient? Does the solid has a heat energy source or somewhere a fixed temperature?

good luck, Laika, still orbiting
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Two-sided Wall Heat Transfer BC - No Separate Solid Mesh and No Heat Transfer Coeff swahono OpenFOAM Running, Solving & CFD 10 October 15, 2018 06:43
Heat Flux at wall in a conjugate heat transfer problem Chander CFX 2 July 9, 2011 23:22
No Heat Transfer between two solid domains Mike ZH CFX 7 July 26, 2008 17:50
Convective Heat Transfer - Heat Exchanger Mark CFX 6 November 15, 2004 16:55
free convection heat transfer from a heated horizontal surface through a liquid to a thin cooled fin Kaushik FLUENT 1 May 8, 2000 07:47


All times are GMT -4. The time now is 08:38.