CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Monitor point

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 24, 2006, 10:07
Default Monitor point
  #1
Frank
Guest
 
Posts: n/a
Hi,

I want to export Static pressure from an unsteady calculation at different points using the monitor panel. I defined my points, and set static pressure in the surface monitor. But I don't know what to specify in the "report type"? There is several option for a surface, but what happen for a point? I used "sum", "Integral"...for 3 differents point and obtained exactly the same results for all the points.... Any idee? thanks in advance.

Frank
  Reply With Quote

Old   January 24, 2006, 19:00
Default Re: Monitor point
  #2
Thomas
Guest
 
Posts: n/a
You should create a surface point and select a vertex average report type.

thomas
  Reply With Quote

Old   January 25, 2006, 13:22
Default Re: Monitor point
  #3
Frank
Guest
 
Posts: n/a
It is exactly what I've done, but results are strange...close data whatever the point location, which is not the case.

Thanks anyway

Frank
  Reply With Quote

Old   January 25, 2006, 23:52
Default Re: Monitor point
  #4
Muhammad Shakaib
Guest
 
Posts: n/a
You can check whether the points are located at the right place using display-contours(unfilled)-surfaces(surface points)
  Reply With Quote

Old   January 27, 2006, 12:11
Default Re: Monitor point
  #5
Anindya
Guest
 
Posts: n/a
Use the area weighted average.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 00:53.