CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

create helical ribbon

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 16, 2006, 06:01
Default create helical ribbon
  #1
hamina
Guest
 
Posts: n/a
please help me to create th geometrie of helical ribbon in gambit thanks
  Reply With Quote

Old   February 16, 2006, 06:02
Default Re: create helical ribbon *NM*
  #2
hamina
Guest
 
Posts: n/a
  Reply With Quote

Old   February 16, 2006, 08:24
Default Re: create helical ribbon by gambit
  #3
hamina
Guest
 
Posts: n/a
please help me tu create hilical ribbon by gambit

  Reply With Quote

Old   February 16, 2006, 20:52
Default Re: create helical ribbon by gambit
  #4
Wael
Guest
 
Posts: n/a
Hi Hamina, you should try the sweep process , so you can sweep a circular surface to make a helical geometry. Please come back if there is any question. Hope that help you. Wael
  Reply With Quote

Old   February 20, 2006, 06:55
Default Re: create helical ribbon by gambit
  #5
hamina
Guest
 
Posts: n/a
thank you if you give one exemple step by step in the gambit with the journal of gambit
  Reply With Quote

Old   February 20, 2006, 06:58
Default Re: create helical ribbon by gambit
  #6
hamina
Guest
 
Posts: n/a
help with the example step by step in gambit or with th jouranal of gambit
  Reply With Quote

Old   February 20, 2006, 09:08
Default Re: create helical ribbon by gambit
  #7
Wael
Guest
 
Posts: n/a
Sorry for my late response. 1-make a circular Omesh (if the cross section is a circle) 2-make a vertex in the center of the circle 3. make a line using the rotate vertex option using this point, you can put the angle (360 for one turn ---720 for two turns etc.) and put the pitch too. 4. make the volume of the helical geometry by the sweep face command and select the circular face and the line mad in step 3. 5.now you can mesh the volume or in step 1 mesh the circular face as you like, also, mesh the line made in step 3. Using sweep face with mesh that will mesh the volume too. Hope that help you. My best regards. Wael
  Reply With Quote

Old   February 20, 2006, 09:22
Default Re: create helical ribbon by gambit
  #8
hamina
Guest
 
Posts: n/a
thank you for your kindness is what you puver to give me an example on gambit on the journal of the gambit
  Reply With Quote

Old   February 21, 2006, 09:27
Default Re: create helical ribbon by gambit
  #9
hamina
Guest
 
Posts: n/a
I have to test but its does not go if you vouler gives me a numerical example if it like to you
  Reply With Quote

Old   October 12, 2012, 07:03
Default gambit helical ribbon creation
  #10
New Member
 
kannoju nandini
Join Date: Oct 2012
Posts: 1
Rep Power: 0
kannojunandini is on a distinguished road
can anyone plz specify the series of steps to creat helical ribbon in gambit......
kannojunandini is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to set periodic boundary conditions Ganesh FLUENT 15 November 18, 2020 07:09
[blockMesh] Include list of points Hikachu OpenFOAM Meshing & Mesh Conversion 0 June 20, 2011 10:03
Actuator disk model audrich FLUENT 0 September 21, 2009 08:06
Where's the singularity/mesh flaw? audrich FLUENT 3 August 4, 2009 02:07
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55


All times are GMT -4. The time now is 11:19.