CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   How can I compare the results of different mesh an (http://www.cfd-online.com/Forums/fluent/39677-how-can-i-compare-results-different-mesh.html)

nan February 16, 2006 20:45

How can I compare the results of different mesh an
 
I got the unsteady analysis results of a tank model which used different meshes. I used different under relaxation settings(moment, pressure) in order to avoid turbulent viscosity limit.

But in some timesteps, their features of flow differ greatly.

Can I compare these results directly?

Any help will be very much appreciated. Thanks.

ANJUM NAVEED February 17, 2006 04:14

Re: How can I compare the results of different mes
 
hi if you want to compare results of two different meshes. save result of first mesh by your xy plot window by write. and when you plot result for second mesh in that xy plot window click load file and then browse to your previous save file. you will see both results in same window. best wishes Anjum

nan February 20, 2006 22:18

Re: How can I compare the results of different mes
 
Thank you, Anjum!


All times are GMT -4. The time now is 12:11.