CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

How to simulate 3D shell and Tube heat Exchanger

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 17, 2006, 10:39
Default How to simulate 3D shell and Tube heat Exchanger
  #1
san
Guest
 
Posts: n/a
hi,

i wanted to carry out 3D shell and Tube Heat Exchanger analysis in fluent. All fluent user are welcome to post there views and ideas on how to carry out this problem. It will be very help full to me.

Thanks for all fluent users
  Reply With Quote

Old   February 20, 2006, 11:48
Default Re: How to simulate 3D shell and Tube heat Exchang
  #2
vivek
Guest
 
Posts: n/a
A full size conjugate heat transfer of the whole shell and tube heat exchanger can be a little difficult depending on the cooler size and the computational capabilities you have. The work around is to simulate a small size to determine thermal and pressure drop performance. It could be scaled to the full size core. Scaling could be tricky, considering you have baffles and the flow might not be of regular pattern. You could try the dual cell model in fluent. Keep posted on how you modelled it.
  Reply With Quote

Old   February 22, 2006, 06:44
Default Re: How to simulate 3D shell and Tube heat Exchang
  #3
san
Guest
 
Posts: n/a
Hi,

I agree with your comment on computational dificulties to solve a full fledge Shell and tube Heat Exchanger.

can you help me in getting the "Dual cell Model" as an demo to learn the process of computation.

I don't have it.

Thanking you, san
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Shell-and-tube heat exchanger Andytzki FLUENT 0 February 14, 2011 16:22
FSI error ERROR #001100279(Shell & Tube heat exchanger) Chandrashekhar CFX 3 March 26, 2010 16:04
Heat exchanger modelling Diana FLUENT 5 February 24, 2010 19:02
Heat Exchanger Model - urgent JSM FLUENT 6 September 22, 2007 04:25
3D shell and tube heat exchanger Peter Jansen FLUENT 2 June 7, 2006 07:01


All times are GMT -4. The time now is 12:02.