CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

porous media/jump mass flow problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 17, 2006, 12:49
Default porous media/jump mass flow problem
  #1
Marijo
Guest
 
Posts: n/a
Hi,

I have done a simulation with 4 porous media and also done with 4 porous jump. Mass flow in the first two porous media or jump is a positive value but next 2 porous media or jump gave me negative value. But when I brake porous media or jump into 10 pieces than the value of each peace is positive. Why is that? Why it gave me a negative value in the first place?

Thank you.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
rotating porous media in a general flow a_dores FLUENT 0 October 31, 2010 05:50
CFX-Post: problem with mass flow Markus CFX 5 February 19, 2005 18:30
Target Mass Flow Rate Nitin FLUENT 6 March 12, 2004 06:39
Determine mass flow rate along flow path Atit Koonsrisuk CFX 2 October 5, 2003 04:47
Problem on boundry of two phase flow youngan CFX 0 June 30, 2003 02:32


All times are GMT -4. The time now is 14:31.