CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

porous media/jump mass flow problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 17, 2006, 12:49
Default porous media/jump mass flow problem
  #1
Marijo
Guest
 
Posts: n/a
Hi,

I have done a simulation with 4 porous media and also done with 4 porous jump. Mass flow in the first two porous media or jump is a positive value but next 2 porous media or jump gave me negative value. But when I brake porous media or jump into 10 pieces than the value of each peace is positive. Why is that? Why it gave me a negative value in the first place?

Thank you.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Target Mass Flow Rate Nitin FLUENT 9 June 17, 2017 11:30
rotating porous media in a general flow a_dores FLUENT 0 October 31, 2010 05:50
CFX-Post: problem with mass flow Markus CFX 5 February 19, 2005 18:30
Determine mass flow rate along flow path Atit Koonsrisuk CFX 2 October 5, 2003 05:47
Problem on boundry of two phase flow youngan CFX 0 June 30, 2003 03:32


All times are GMT -4. The time now is 03:36.