CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

fluctuate residual

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 20, 2006, 12:31
Default fluctuate residual
  #1
am
Guest
 
Posts: n/a
Dear all,

I'm running non-premixed combustion and use DPM to inject fuel and moisture (on the same surface).As iterating is going on, the residual keep fluctuating. i've tried changing my no. of iteration/DPM and increase max no. of steps but it didn't work.

Any advice? Thank you in advance

-Am-
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
transsonic nozzle with rhoSimpleFoam Unseen OpenFOAM Running, Solving & CFD 7 April 16, 2014 03:38
How to write k and epsilon before the abnormal end xiuying OpenFOAM Running, Solving & CFD 8 August 27, 2013 15:33
Orifice Plate with a fully developed flow - Problems with convergence jonmec OpenFOAM Running, Solving & CFD 3 July 28, 2011 05:24
Extrusion with OpenFoam problem No. Iterations 0 Lord Kelvin OpenFOAM 6 April 12, 2011 11:24
Differences between serial and parallel runs carsten OpenFOAM Bugs 11 September 12, 2008 11:16


All times are GMT -4. The time now is 15:45.