CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Change diffusivity in porous media

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 23, 2006, 19:24
Default Change diffusivity in porous media
  #1
Jose
Guest
 
Posts: n/a
Hi everyone:

I'm trying to change the values of the diffusivity in the porous zone according to the Bruggemann correction. But my model not only consist in porous zones I have flow channels too and I'm afraid that if link the UDF, this will change the diffusivity in the whole model. I'm writing an UDF based on the example that is in the section 3.10.2 of the UDFs tutorial. But when I compiled the UDF, Fluent show me this message; "structure referenced not implemented". I will be very grateful if anybody could give me an advice to solve this problem.

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Multiphase Porous Media Flow - Convergence Issues VT_Bromley FLUENT 7 May 14, 2020 17:34
Porous media setup issues in Fluent Bernard Van FLUENT 29 January 26, 2017 05:09
How to model granular flow through porous media Axius FLUENT 2 August 7, 2014 11:34
porous media: Fluent or Star-CD? Igor Main CFD Forum 0 December 5, 2002 16:16
Diffusivity for multi-comp system in porous media Atul Kumar FLUENT 0 June 5, 2002 15:45


All times are GMT -4. The time now is 03:24.